PLEASE BE AWARE THERE ARE DELAYS BEING EXPERIENCED ACROSS ALL FREIGHT NETWORKS DUE TO COVID-19 - WE APOLOGISE FOR ANY DELAYS YOU MAY EXPERIENCE DUE TO THESE CIRCUMSTANCES.
We offer the following shipping options for all items except software downloads and bulky items:
Standard Shipping $25
Express Shipping $45
Some items may be considered Bulky and therefore their shipping charge is $50, this is calculated at the checkout if applicable. This is the total shipping charge and is not in addition to our Standard or Express Shipping charges.
All orders (in stock items) must be placed by 12.30pm AEST/AEDT for same day despatch. Orders placed after 12.30pm, during weekends, holidays or after hours will be processed the following business day.
We do our best to maintain stock of our most popular items, all other items are normally despatched within a few days however we will advise you if your item is not in stock within a few hours (excluding weekends and public holidays) and will advise of the approximate delivery time.
We primarily use Australia Post, TNT, StarTrack Express, Couriers Please, TFM Logistics and Toll Express depending on the delivery location and shipping option chosen.
Delivery timings are approximate and may differ due to circumstances outside of our control such as flight delays, traffic incidents, extreme weather etc.
Software downloads that do not require delivery of a physical product do not attract a shipping charge. Serial Numbers will be emailed within 24 hours, turnaround is often within a few hours.
Get everything you need for cameras in live production with a single converter! Connect your camera’s SDI or HDMI outputs for conversion to optical fiber, while your switcher program feed can be fed back via optical fiber for camera monitoring. ATEM Camera Converter includes an internal battery, talkback, tally, and microphone inputs!
Now you can position your cameras a long distance away from your switcher and get closer to the action with ATEM Camera and Studio converters. ATEM Camera Converter is a super tough optical fiber converter with talkback, tally, microphone inputs and a built in long life battery. Using low cost optical fiber you can connect to your cameras up to 28 miles away and even at those great distances you still get full bi-directional video, audio, talkback and tally signals!
ATEM Converters are the perfect solution for live music and sporting events where you need to place cameras in remote locations such as on race tracks or near to a stage, where there is a huge distance between the live action and your switcher! Connect up to 4 ATEM Camera Converters to each ATEM Studio converter and get multiple camera talkback, so all camera operators can communicate with the switcher operator using talkback that is embedded into channels 15 and 16 of the optical fiber SDI connection.
There are two ATEM converters for use at opposite ends of a live camera connection! ATEM Camera Converter converts your camera’s SDI or HDMI output to optical fiber, with embedded external audio and talkback from the camera position. The machined aluminum design is lightweight, strong and includes an internal long life battery for increased portability. ATEM Studio converter's rack mount design has 4 bi-directional optical fiber connections so you can connect multiple camera converters and convert the optical fiber input to SDI and de-embed audio using XLR connections.
ATEM Camera Converter and ATEM Studio converter are designed to be used at either end of a live camera connection. Now you can easily connect cameras to production switchers, even when they are huge distances apart. Each converter has been designed to make it easier than ever to connect to cameras with video, audio, talkback and tally. The battery powered ATEM Camera Converter is located at the camera and is designed to be used in remote locations. The ATEM Studio converter has a rack mount design that contains all connections built into the unit, ready for your next event.
For further information check out the Blackmagic Design website
Connections | |
---|---|
SDI Video Input | 1 x 10 bit SD/HD switchable. |
SDI Video Output | 1 x 10 bit SD/HD switchable. |
HDMI Video Input | 1 x HDMI type A connector. |
HDMI Video Output | 1 x HDMI type A connector. |
Talkback Audio | 1 x 3.5mm stereo connector for talkback microphone. 1 x 3.5mm stereo connector for stereo headphones, compatible with iPhone headsets. |
Analog Audio | 2 x balanced 1/4" TRS connectors (stereo) microphone level in. When connected, replaces audio from SDI In or HDMI In. |
Optical Fiber Video Input | 1 x single mode SD/HD switchable with LC connector. |
Optical Fiber Video Output | 1 x single mode SD/HD switchable with LC connector. |
Optical Fiber Audio Input | 4 x single mode camera audio inputs with LC connector. Channels 1 & 2 are camera audio. Channels 15 & 16 are intercom audio. |
Optical Fiber Audio Output | 4 x single mode camera audio outputs with LC connector. Channels 1 & 2 are camera audio. Channels 15 & 16 are intercom audio. |
Computer Interface | 1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control. |
Standards | |
SDI Format Support | 525i59.94, 625i50, 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50, 1080p59.94, 1080p60, 2048x1080p/23.98, 2048x1080p/24, 2048x1080p/25,2048x1080PsF/23.98, 2048x1080PsF/24, 2048x1080PsF/25, 2048x1556PsF/23.98, 2048x1556PsF/24,2048x1556PsF/25. |
HDMI Format Support | 525i59.94, 625i50, 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50, 1080p59.94, 1080p60. |
SDI Compliance | SMPTE 259M, SMPTE 292M. |
Audio Sampling | Television standard sample rate of 48Khz, 24 bit A/D conversion. |
Video Sampling | 4:2:2 |
Colour Precision | 10-bit |
Colour Space | REC 601, REC 709 |
Multiple Rate support | SDI and HDMI are switchable between between standard definitlon and high definition |
Software | |
Software Included | Converter Utility. |
Operating Systems | Mac OS X 10.9 Mavericks |
Mac OS X 10.10 Yosemite or later | |
Windows 7 or Windows 8 | |
Power Supply | 12V power supply included with international socket adaptors for all countries. |
Environmental Specifications | |
Operating Temperature | 0° to 40° C (32° to 104° F) |
Storage Temperature | -20° to 45° C (-4° to 113° F) |
Relative Humidity | 0% to 90% non-condensing |
What's Included | ATEM Camera Converter |
Software CD | |
Warranty | 3 Year Limited Manufacturer's Warranty. |
*Specifications correct at time of publication