- Australian Business Owned and Operated - Free Call - 1300 653 052
GPI & Tally interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of inputs and outputs.
GPI and Tally Interface also works as a Videohub control panel without buttons and LEDs so you can make your own! Now anyone can connect to Videohub routers to control cross-points!
For further information check out the Blackmagic Design website
| Connections | Contact Closure: 25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs. |
|---|---|
| Computer Interface: 1 x USB 2.0 high speed interface for configuration and firmware updates. | |
| Inputs: Optical isolators triggered by connection to ground. Max 5V at 14mA. | |
| Outputs: Mechanical relay contact closure to ground. Max 30V at 1A. | |
| Ethernet: 10/100 BaseT with loop through for connecting to other ethernet enabled equipment. | |
| Software | Software Included: Configured via ATEM Switcher Utility. |
| Internal Software Upgrade: Firmware built into software driver. Loaded at system startup or via updater software. | |
| Operating Systems | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan or later. |
| Windows 8.1 or Windows 10. | |
| Power Requirements | Power Supply: 12V power supply included with international socket adaptors for all countries. |
| Environmental Specifications | Operating Temperature: 0° to 40° C (32° to 104° F) |
| Storage Temperature: -20 - 60 degrees celsius | |
| Relative Humidity: Up to 95% | |
| What's Included | GPI and Tally Interface |
| Software CD | |
| Power Supply | |
| Warranty | 12 Months Limited Manufacturer's Warranty. |
*Specifications correct at time of publication
