- Australian Business Owned and Operated - Free Call - 1300 653 052
Magewell Pro Capture AIO 4K Plus - One channel UHD capture card.
The Magewell Pro Capture AIO 4K Plus captures one of the following:
Get the most of your Magewell device with these software driver utilities from Magewell.
For more information on the Magewell Pro Capture AIO 4K Plus, check out the Magewell website.
| Supported OS | Windows 7/8/8.1/10/2008/2008R2/2012 (x86 & x64) |
|---|---|
| Will be compatible with Linux soon | |
| Supported APIs | Windows: DirectShow DirectKS Wave API/DirectSound/WASAPI |
| Supported Software | VLC |
| VirtualDub | |
| OBS | |
| xSplit | |
| vMix | |
| VidBlaster | |
| Wirecast | |
| Microsoft Media Encoder | |
| Adobe Flash Media Encoder | |
| Any other DirectShow/V4L2 encoding/streaming software | |
| Input Interfaces | HDMI: DVI-D 1.0 HDMI 2.0 |
| BNC: SD/HD/3G/ 6G SDI | |
| Output Interfaces | PCIe Gen2 x 4 |
| Input Features | Auto scan of video input sources when there is no signal input to the currently selected input source |
| Manual selection of video input source | |
| Auto selection of linked (embedded) audio input source when the video input source changes | |
| Manual selection of audio input source | |
| Support for standard crossbar based on video input source selection | |
| Support for input video resolutions up to 4096×2160 pixels | |
| HDMI Specific Features | 594MHz HDMI receiver |
| Adaptive HDMI equalizer | |
| Support for customized EDID | |
| Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames | |
| Full colorimetry support | |
| Support for 8/10/12-bit color depths | |
| Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling | |
| Support for up to 8-channel IEC60958/IEC61937 audio streams | |
| Support for extraction of audio formation information & channel status data | |
| Support for extraction of video timing information | |
| Support for extraction of 3D format information | |
| Support for extraction of Sony/Canon DSLR time code | |
| Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode | |
| SDI Specific Features | integrated cable equalizer supporting cable lengths up to 230M for HD signals |
| Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards | |
| Support for 2K (2048×1080) & 4K (4096×2160) mode | |
| Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling | |
| Support for 10/12-bit color depth | |
| Support for extraction of SMPTE 352 payload identifier | |
| Support for up to 8 (mono) audio channels at 48KHz (channels 1–8 from the 16 available in the SDI spec) | |
| Support for extraction of audio formation information & channel status data | |
| Limited support of 3Gb-DS: only the first stream can be captured | |
| Limited support for capture of the first link of dual link interfaces: | |
| YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 | |
| YCbCr 4:4:4 10-bit: captured as 4:2:2 | |
| RGB 4:4:4: R/B sub-sampled | |
| Video Capture Formats | Support for capture image resolutions up to 4096×2160 pixels |
| Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth & image resolution) | |
| Support for 4:2:0 8-bit capture formats: NV12, I420, YV12 | |
| Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY | |
| Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32 | |
| Support for 4:4:4 10-bit capture formats: V410, Y410 | |
| More capture formats are supported via Pro Capture SDK for DirectKS | |
| Video Processing Features | Two video processing pipelines with ~720Mpixels/s processing bandwidth |
| Full 10-bit video processing | |
| Video cropping | |
| Video scaling | |
| Video de-interlacing Weave Blend top & bottom field Top field only Bottom field only | |
| Video aspect ratio conversion Auto or manual selection of input aspect ratio Auto or manual selection of capture aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) | |
| Video colour format conversion Auto or manual selection of input color format & quantization range Auto or manual selection of capture color format, quantization range & saturation range Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats Support for Limited or Full quantization range Support for Limited, Full & ‘Extended gamut’ saturation range | |
| Video frame rate conversion | |
| Video OSD composition Support for PNG OSD image (up to 4069×2160) Support for dynamic loading of RGBA OSD image via SDK | |
| Multiple Cards per System | Support for multiple cards plugged to one system |
| On-board rotary switch to set card number, with 16 positions from 0 to F | |
| System hardware device tree will display “01: Pro Capture AIO 4K+” when rotary switch is set to 1,and so on | |
| The video and audio device names displayed in your software will include the card number (set by the rotary switch) | |
| Multiple Capture Streams | Unlimited capture streams for any one input channel |
| Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream | |
| Ultra Low Latency Support | Latency of 64 video lines |
| Partial notification mode in SDK | |
| Timestamp &A/V Synchronization | Hardware based 100ns high resolution clock |
| Audio frames (192 audio samples) & video frames are stamped with hardware clock | |
| Hardware clock can be synchronized across cards (via SDK) | |
| Video Capture SG-DMA | ~1600MB/s per channel DMA bandwidth in PCIe 2.x system |
| ~800MB/s per channel DMA bandwidth in PCIe 1.x system | |
| Support for auto detection of Intel tiled GPU surface | |
| Support for DirectGMA for AMD video adapter chipsets | |
| Support for GPUDirect for Nvidia video adapter chipsets | |
| SDK | Pro Capture SDK for DirectShow for easy integration (Windows) |
| Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows) | |
| Windows Driver Tweaks | All options can be controled by three levels of registry key: global level, product level and device level |
| Video,Audio, Crossbar filter names can be customized via registry keys | |
| Firmware Upgrade | Multiple cards in one system can be upgraded simultaneously |
| Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed) | |
| LED Indicator | Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. |
| Form Factor | Low profile PCIe x4 Add-on Card |
| 140mm x 68.88mm (without PCI bracket) | |
| Power Consumption | Max current at 12V: ~ 0.59 A |
| Max current at 3.3V: ~ 0.97 A | |
| Max power consumption: ~ 8.4 W | |
| Working Environment | Operating temperature: 0 to 40 deg C |
| Storage temperature: –20 to 70 deg C | |
| Relative Humidity: 5% to 90% non-condensing |
