- Australian Business Owned and Operated - Free Call - 1300 653 052
Magewell Pro Capture AIO 4K - One channel 4K capture card.
Minimum Order Quantity - 20 units
The Magewell Pro Capture AIO 4K captures one of the following:
Get the most of your Magewell device with these software driver utilities from Magewell
For more information on the Magewell Pro Capture AIO 4K, check out the Magewell website.
| Supported OS | Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 and x64) |
|---|---|
| Linux | |
| Mac OS X (10.8 and above) | |
| Supported APIs | DirectShow |
| DirectKS | |
| Wave API/DirectSound/WASAPI | |
| V4L2 | |
| ALSA | |
| Supported Software | VLC |
| VirtualDub | |
| OBS | |
| XSplit | |
| vMix | |
| VidBlaster | |
| Wirecast | |
| Microsoft Media Encoder | |
| Adobe Flash Media Encoder | |
| Any other DirectShow/V4L2 encoding/streaming software | |
| Input Interfaces | |
| HDMI | HDMI 1.4 Type-A |
| HDMI 2.0 (recommended to use HDMI 2.0 cables) | |
| SDI | SD |
| HD | |
| 3G | |
| 6G SDI | |
| Output Interfaces | PCIe Gen2 x 4 |
| Input Features | Auto scan of video input sources when there is no signal input to the currently selected input source |
| Manual selection of video input source | |
| Auto selection of linked (embedded) audio input source when the video input source changes | |
| Manual selection of audio input source | |
| Support for standard crossbar based on video input source selection | |
| Support for input video resolutions up to 4096×2160 pixels | |
| HDMI Specific Features | 594MHz HDMIreceiver |
| Adaptive HDMI equalizer | |
| Support for customized EDID | |
| Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames | |
| Full colorimetry support | |
| Support for 8/10/12-bit color depths | |
| Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling | |
| Support for up to 8-channel IEC60958/IEC61937 audio streams | |
| Support for extraction of audio formation information & channel status data | |
| Support for extraction of video timing information | |
| Support for extraction of 3D format information | |
| Support for extraction of Sony/Canon DSLR time code | |
| Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode | |
| SDI Specific Features | Integrated cable equalizer supporting cable lengths up to 230M for HD signals |
| Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards | |
| Support for 2K (2048×1080) & 4K (4096×2160) mode | |
| Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling | |
| Support for 10/12-bit color depth | |
| Support for extraction of SMPTE 352 payload identifier | |
| Support for up to 8 (mono) audio channels at 48KHz (channels 1–8 from the 16 available in the SDI spec) | |
| Support for extraction of audio formation information & channel status data | |
| Limited support of 3Gb-DS: only the first stream can be captured | |
| Limited support for capture of the first link of dual link interfaces: | |
| YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 | |
| YCbCr 4:4:4 10-bit: captured as 4:2:2 | |
| RGB 4:4:4: R/B sub-sampled | |
| Video Output Formats | Support for output image resolutions up to 4096×2160 pixels |
| Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth & image resolution) | |
| Support for 4:2:0 8-bit output formats: NV12, I420, YV12 | |
| Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY | |
| Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32 | |
| Support for 4:4:4 10-bit output formats: V410, Y410 | |
| More output formats are supported via Pro Capture SDK for DirectKS | |
| Video Processing Features | Two video processing pipelines with ~720Mpixels/s processing bandwidth |
| Full 10-bit video processing | |
| Video cropping | |
| Video scaling | |
| Video de-interlacing | |
| Video aspect ratio conversion | |
| Video color format conversion | |
| Video frame rate conversion | |
| Multiple Cards per System | Support for multiple cards plugged to one system |
| On-board rotary switch to set card number, with 16 positions from 0 to F | |
| System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on | |
| The video and audio device names displayed in your software will include the card number (set by the rotary switch) | |
| Multiple Output Streams | Unlimited output streams for any one input channel |
| Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream | |
| Ultra Low Latency Support | Latency of 64 video lines |
| Partial notification mode in SDK | |
| Timestamp and A/V Synchronisation | Hardware based 100ns high resolution clock |
| Audio frames (192 audio samples) & video frames are stamped with hardware clock | |
| Hardware clock can be synchronized across cards (via SDK) | |
| Video Output SG-DMA | ~1600MB/s per channel DMA bandwidth in PCIe 2.x system |
| ~800MB/s per channel DMA bandwidth in PCIe 1.x system | |
| Support for auto detection of Intel tiled GPU surface | |
| Support for DirectGMA for AMD video adapter chipsets | |
| Support for GPUDirect for Nvidia video adapter chipsets | |
| SDK | Pro Capture SDK for DirectShow for easy integration (Windows) |
| Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows) | |
| Windows Driver Tweaks | All options can be controled by three levels of registry key: global level, product level and device level |
| Video,Audio, Crossbar filter names can be customized via registry keys | |
| Firmware Upgrade | Multiple cards in one system can be upgraded simultaneously |
| Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed) | |
| Dimensions | 140mm x 68.88mm |
| Power Consumption | Max current at 12V |
| Max current at 3.3V | |
| Temperature | Operating: 0° to 40°C |
| Storage: -20° to 70°C | |
| Humidity | 5% to 90% non-condensing |
*Specifications correct at time of publication
