- Australian Business Owned and Operated - Free Call - 1300 653 052
Magewell Pro Convert SDI Plus is a super compact device that will convert your SDI video signal to the NDI protocol allowing reliability and versatility in your live streaming workflow for your SDI devices.
The Magewell Pro Convert SDI Plus adopts NewTek’s royalty-free NDI® protocol for encoding and transmission, the Pro Convert family easily and reliably converts SDI video signals into NDI streams. The SDI Loop allows you view your input on an external monitor.
These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.
Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!
Pro Convert SDI Plus features a small size of 117.5mm x 66.7mm and 23.4mm thickness, weighing only 234g.
Find out further info over at Magewell's website.
| Pro Convert SDI Plus Specifications | |
|---|---|
| Supported Web Browser | Microsoft Internet Explorer 11 |
| Microsoft Edge | |
| Mozilla Firefox version 61 and above | |
| Google Chrome version 49 and above | |
| Apple Safari 11.1 and above | |
| Opera 55.0.2994.44 and above | |
| Supported Software | OBS |
| XSplit | |
| vMix | |
| VidBlasterX | |
| Wirecast | |
| streamstar SW | |
| mimoLive | |
| Any other NewTek NDI-enabled encoding or streaming software | |
| Input Interfaces | BNC: SD/HD/3G SDI |
| Loop-through Interface | BNC: SD/HD/3G SDI |
| Storage Interface | SD Card (functions to be developed) |
| PTZ + TALLY Control | Mini-DIN–8 jack |
| Screw Mounting Hole | 1⁄4–20 mounting hole |
| Network Interfaces | 10/100/1000Mbps Ethernet |
| IEEE 802.3af PoE | |
| USB Interface | USB2.0 Type B |
| 5V/2.1A power supply | |
| USB RNDIS/ECM | |
| Input feature | Support for up to 2048x1080 60fps input resolution |
| SDI Specific Features | Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals |
| Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS (SMPTE 2081) standards | |
| Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling | |
| Support for 10/12-bit color depth | |
| Support for extraction of SMPTE 352 payload identifier | |
| Support for up to 16 (mono) audio channels | |
| Support for extraction of audio formation information & channel status data | |
| Limited support of 3Gb-DS: only the first stream can be captured | |
| Limited support for capture of the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-bit: captured as 4:2:2 RGB 4:4:4: R/B sub-sampled |
|
| NDI® Output Format | Support for 4:2:2 8-bit output |
| Support for up to 2048x2160 120fps | |
| Support for NDI 3.x | |
| Video Processing Features | Support for capture resolutions up to 2048x1080 |
| Video brightness, contrast, saturation, hue adjustment | |
| Video de-interlacing: Top field only Bottom field only |
|
| Video aspect ratio conversion: Auto or manual selection of output aspect ratio |
|
| Video color format conversion: Auto or manual selection of input color format & quantization range Auto or manual selection of output color format, quantization range & saturation range Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats Support for Limited or Full quantization range Support for Limited, Full & ‘Extended gamut’ saturation range |
|
| Video frame rate conversion | |
| Video mirror flip | |
| NDI® Source Name | Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’. |
| Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’. | |
| Support for setting board-index, from 0 to F, through on-board rotary switch | |
| Firmware Upgrade | Support for manual update using Web UI |
| LED Indicator | Status LEDs indicate the working state of the device: Power supply: on/off Tally: preview/program Input signal: locked/unlocked Loopthrough signal: loopthrough connected and signal detected/undetected |
| Form Factor | 117.5mm (L) x 66.7mm (W) x 23.4mm (H) |
| Accessories | USB 2.0 A to B Cable |
| 5V/2.1A power adaptor | |
| Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY) | |
| L-bracket | |
| LED matrix panel (optional) | |
| Power Consumption | 5V max current: ~1.5A |
| Max power consumption: ~8W | |
| Working Environment | Operating temperature: 0 to 45 deg C |
| Storage temperature: –20 to 70 deg C | |
| Relative Humidity: 5% to 90% non-condensing | |
| Specifications correct at time of publication | |
